Click on the image to check the artwork
S/N |
Description |
Specification |
1 |
Model |
RS 46 |
2 |
Working Width |
210" |
3 |
Gauge |
E24 |
4 |
Speed |
700RPM (subject to the material & design) |
5 |
Guide bar |
2 Ground bar, 42Pattern bars (6S) and 2 Spandex bars |
6 |
Pattern drive |
Electronic |
7 |
No. of Pattern bar track |
6 Tracks |
8 |
Pattern needle |
6 kinds of fixed needles (1-6), pattern needle width is 2.0 |
9 |
Beam dimension for ground bars& spandex bars |
21" |
10 |
Let off device |
Electronic, it is controlled by 1KW servo motor |
11 |
Take up device |
Electronic, it is controlled by 1KW servo motor & gear |
12 |
Batching device |
Electronic, it is controlled by 1 pc 0.75KW servo motor & gear box. The max. batching diameter is about |
13 |
Total shogging |
Accumulate 170 needles (subject to the material) |
14 |
Stair |
1 piece |
15 |
Tension device |
Spring tension |
16 |
Stop device |
Infrared automatic stop device |
17 |
Main motor power |
7.5 KW |
18 |
Power |
415V 3PHS 50HZ 24A 17KVA |
19 |
Dimension (L*W*H mm) |
9548x6300x4650 |
20 |
Weight |
18,000KGS |
Machine motor brand:ABB
Needle brand:Germany GROZ
Servo motor brand:Japan YASKAWA
Computer brand:Japan
Wearing spare parts are out of warranty
All kinds of needle parts include Groove pin, Needle core, Sinker, Knocking-over sinker, Guide
needle, Separating needle, Pattern needle. Steel strip & steel wire.
Warranty period
Warranty period is 12 months from the date of ex-factory, except extra spares and wearing spares parts. The seller will not be responsible for any damages of the machine due to improper
operation or poor maintenance by the End-user during the warranty period.
Working environment and equipment requirements
The working area temperature is 24+/- 2 º C, relative humidity is less than 65%, foot bearing
load over 10,000KGS/square meter, avoid ventilation, moisture & all kinds of dust.
Air compressor is required, should be having the function of air dry & chiller, to make sure the air
supplied to the machine are out of moisture.